Nabertherm LT 02/13 CR Sintering Furnace

Sintering Furnace LT 02/13 CR for Cobalt-Chromium

Read more Enquire now

The sintering furnace LT 02/13 CR is perfectly suited for sintering of cobalt-chromium restorations. The blanks are placed in a special sintering bell and will be heat-treated under argon. The specific design in combination with sintering pearls provides for good sintering results in a nearly oxygen-free atmosphere at very low argon consumption.

The system is open and can be programmed for various materials up to sintering temperatures of 1300 °C. Two pre-installed sample programs, which can be adjusted individually. Furthermore, the sintering furnace LT 02/13 CR is designed for a single-phase connection.

  • Tmax 1300 °C
  • Working temperature up to 1280 °C, depending on the CoCr material
  • Single-phase connection
  • Only fiber materials are used which are not classified as carcinogenic according to TRGS 905, class 1 or 2
  • Double-walled housing made of textured stainless steel provide for low surface temperatures
  • Gas supply system with solenoid valve and flow meter
  • Forced cooling system with compressed air
  • Sintering bell with good sealing for sintering up to 30 single crowns under argon
  • Sintering pearls, Ø 1,25 mm (200 g) included in delivery scope
  • Special tongs included in the delivery scope
  • Type S thermocouple
  • Freely programmable controller C450 allows for automatic temperature control and switching of the gas flow
  • Switching system with solid-state-relays to switch the heating
  • Two different gas flows can be set for the optimal adaptation to the sintering cycle
  • Defined application within the constraints of the operating instructions
  • NTLog Basic for Nabertherm controller: recording of process data with USB-flash drive
 
Additional equipment
  • Over-temperature limiter with adjustable cutout temperature for thermal protection class 2 in accordance with EN 60519-2 as temperature limiter to protect the furnace and load
  • Process control and documentation via VCD software package for monitoring, documentation and control

 

Model Tmax Inner dimensions in mm Volume Maximum Outer dimensions in mm5 Connected Electrical Weight Minutes
  °C w d h in l units W D H1 load kW connection2 in kg to Tmax4
LT 02/13 CR 1300 130 120 120 1,9 30 422 320 (4303) 430 + 230 2.2 1-phase 25 35
1Including opened lift door 2These furnaces are available for main voltage of 200 V, 208 V, 220 V - 240 V, 1/N/PE or 2/PE
3Including compressed air connection for forced cooling4In the empty and closed furnace, connected to 230 V 1/N/PE rsp. 400 V 3/N/PE
5External dimensions vary when furnace is equipped with additional equipment. Dimensions on request.
)

Future-Proof your practice today with our cover options

We know an unexpected breakdown in your practice can be a massive headache for you and your patients - which is why we have a dedicated team of 50 people ready to provide you with a range of comprehensive cover options for your practice equipment, giving you complete peace of mind and minimising the cost of an unexpected breakdownYou can depend on us.

High tech digital support specialists

With Protection Cover, you get free access to our team of 10 high tech digital support specialists who can help with digital imaging, lasers and CAD/CAM. For the simpler problems, we also have technicians, who are dedicated to helping you over the phone. You can also at a small cost, use their services even if you don't have cover.

Protection cover

Invest in your practice - choose our comprehensive protection cover. For 12 months we will cover the items you want. It includes an annual service, emergency breakdown, labour and access to our high tech digital support specialists.

Annual service

To get optimum performance from your equipment and to conform to manufacturer’s recommendations, an annual service could be just what you’re looking for. It’s carried out by our accredited team and includes a 3 month warranty on the work.

Emergency breakdown service

We are never far away in an emergency. Unplanned breakdowns are a headache for any surgery. We are more than happy to help.

Call us today on 01 4565288.

Enquire Now

Our equipment team will use the information you provide to respond to your query as promptly as possible.

You could ask about a FREE one-to-one consultation with one of our specialist team, quotation, demonstration of the latest equipment, or any other question you may have in helping you make an informed decision.

Contact Permission (not required)

We’d love to send you exclusive offers and latest news stories from Henry Schein Dental by e-mail. We’ll always treat your personal details with care and will never sell them to other companies for marketing purposes.